Type any keyword (e.g. mmWave, Zooz, glass break, garage, leak, Sonos, Zigbee, fireplace) or pick a category below.
Home Security: Window, Door, Acoustic Glass-Break, Keypads & Sirens
Build an unhackable local alarm system inside Home Assistant (with the free Alarmo integration) that watches every window, door, basement pane, and entryway with zero monthly contracts.
- • You do NOT need a Ring Alarm Base Station or a $20/mo subscription! Ring’s Z-Wave Glass Break Sensors, Keypads, and Contact Sensors use standard Z-Wave S2 and pair directly to your $37 Zooz 800 Z-Wave stick!
- • Use Z-Wave 800 Long Range sensors on critical perimeter doors, gates, and glass breaks; use $10–$14 Zigbee contact sensors if you want to affordably cover 25+ individual windows.
- • Want completely invisible door sensors? Recessed cylindrical Z-Wave sensors drill inside the top edge of wooden doors so nothing shows at all!
Best-Matched Door, Window & Glass-Break Security (6)
Zooz — 800 Series Z-Wave Long Range Open/Close XS Sensor (ZSE41)
Paper-thin (0.3") contact sensor with up to 1,300 ft Long Range reach and S2 encrypted security.
- So thin it fits tightly inside vinyl window channels and narrow door trim
- Optional waterproof case turns it into an outdoor fence gate sensor
Setup Tip: Enroll via Z-Wave Long Range QR code in Home Assistant for multi-year battery life.
Ring (Direct Z-Wave) — Alarm Glass Break Sensor (Pairs Directly to Home Assistant Z-Wave!)
AI acoustic microphone listens across a 25-foot radius for the exact sound signature of shattering glass.
- 1 single sensor covers an entire sunporch, basement wall, or wall of 6 windows!
- Ignores dropping plates or barking dogs while catching real window break-ins
Setup Tip: Mount on wall or ceiling within 25 feet unobstructed view of patio sliders and large picture windows.
Ring (Direct Z-Wave) — Alarm Keypad (2nd Gen) — Full Local Wall Keypad for Alarmo!
Gives family members, babysitters & dog walkers a familiar backlit PIN keypad with entry/exit countdown beeps!
- Built-in rechargeable battery lasts 6+ months per USB charge (or leave plugged in)
- Plays spoken countdown tones, door-open chimes, and Home / Away / Disarmed LED buttons!
Setup Tip: Download the free Ring Keypad Blueprint in Home Assistant to sync PIN codes with Alarmo in 2 minutes.
Aqara — Zigbee Door & Window Contact Sensor (Tiny Pill Design)
Thumb-sized sensor that disappears onto white window frames — affordable enough to put on every window!
- Tiny footprint barely larger than a Tic-Tac box
- Enables Home Assistant to pause your AC/heat automatically whenever kids leave windows open!
Setup Tip: Create a "Before Rain" automation that warns your phone if weather radar shows rain and any upstairs window is open!
Aeotec — Recessed Door Sensor 7 (100% Invisible Inside Door Frame)
Drills into a 3/4" hole on the top edge of solid wood doors so zero plastic shows when the door is closed.
- Completely invisible architectural installation for front doors and interior doors
- CR2 lithium battery lasts ~3+ years
Setup Tip: Check with a magnet that your door doesn’t have a steel exterior skin before drilling.
Aeotec / Zooz — Z-Wave Smart Chime & 105dB Strobe Siren (Plugs Into Wall Outlet)
Gentle door-open chime during the day + ear-splitting 105dB strobe siren with battery backup if an intruder breaks in.
- Internal backup battery keeps screaming even if an intruder unplugs it from the wall
- 30 selectable chime tones for front door open, kids coming home, or water leak alerts
Setup Tip: Doubles as a powered Z-Wave mesh repeater in your hallway.
Keep spare lithium coin/photo cells on hand so Home Assistant low-battery alerts take 15 seconds to swap.
Any Z-Wave, Zigbee 3.0, Matter, or ESPHome device in this category connects locally to Home Assistant!