Reader-supported smart home guide · As an Amazon Associate I earn from qualifying purchases.
Enterprise Home Wi-Fi + Home Assistant + Google Antigravity

Ubiquiti UniFi + Home Assistant: Get the Maximum Speed Out of the Internet You’re Paying For

Most consumer Wi-Fi routers bottleneck your speed well below what enters your house, choke above 40 smart devices, and leave dead spots in the garage. Ubiquiti UniFi paired with Google Antigravity unlocks the maximum wireless speed your internet plan is capable of — plus automatic garage-to-house phone roaming you can only do with Home Assistant!

Real-World Speed Case Study

Get the Maximum Speed Out of What You’re Paying For (My 400 → 1,700 Mbps Example)

When I first installed Ubiquiti UniFi in my house, I was already paying my internet provider for multi-gig fiber capable of those speeds — yet because I was unfamiliar with Ubiquiti’s pro-grade radio menus, my phone speeds were bottlenecked around 400 Mbps.

Once I connected Home Assistant and Ubiquiti to Google Antigravity over SSH and explained in plain English that my Wi-Fi wasn’t reaching my fiber plan’s speed, Antigravity audited every access point channel width, power ratio, and switch negotiation — jumping my wireless speeds from 400 Mbps straight to 1,700 Mbps!

Important Speed Disclaimer: Buying Ubiquiti hardware will not give you 1,700 Mbps unless the internet plan you pay your provider (ISP) for is actually capable of those multi-gig speeds! No router or access point can create faster internet than what enters your home. What proper Ubiquiti tuning does guarantee is eliminating wireless bottlenecks so you get 100% of the internet speed you already pay for across your house without dead zones or dropouts.
Before (Unconfigured Defaults)400 Mbps
After Talking to Google Antigravity1,700 Mbps (4.25x Faster!)

*Measured on a 2-Gig+ fiber ISP plan. Your max internet speed is always capped by the speed tier you pay your ISP for — proper tuning unlocks the speed already coming into your modem!

Default 40 MHz / 80 MHz Narrow Channel Widths
Before: Capped around ~350–450 Mbps even standing right underneath the Access Point
Antigravity Fix: Antigravity inspected the live UniFi RF scan over SSH/API and widened 5 GHz to clean DFS/non-overlapping 80/160 MHz channels + enabled 160/320 MHz on 6 GHz.
"Auto" Transmit Power Screaming Too Loud on 2.4 GHz
Before: Phones clung onto congested slow 2.4 GHz from across the house instead of jumping to fast 5 GHz / 6 GHz
Antigravity Fix: Set 2.4 GHz transmit power 7 dBm lower than 5 GHz/6 GHz ("Custom" Medium/Low on 2.4 GHz, High on 5/6 GHz) so phones naturally prefer high-speed bands.
Smart Queues (SQM) or Legacy Traffic Throttling Accidentally Left On
Before: Router CPU throttled multi-gig fiber downloads thinking it was managing slow DSL bufferbloat
Antigravity Fix: Verified hardware offloading, Flow Control, and 2.5GbE port negotiation end-to-end — unleashing 1,700+ Mbps over Wi-Fi!
Sticky Phone Clinging to Indoor AP in the Garage (and Vice Versa)
Before: 1 bar of unusable Wi-Fi in the garage while standing 8 feet from the Garage AP!
Antigravity Fix: Built a Home Assistant automation linking Garage & House Motion Sensors with UniFi AP status + Minimum RSSI so your phone always locks onto the exact room you’re standing in.
Impossible Without Home Assistant!

Motion-Detector Assisted Phone Roaming (Automatic Garage ↔ House Access Point Handoff)

Even on expensive Wi-Fi systems, iPhones and Androids suffer from the notorious "Sticky Client Problem": you walk out into your garage (through thick fire-rated drywall), and your phone stubbornly hangs onto 1 weak bar from a distant bedroom or living room Access Point instead of switching to the Access Point right above your head in the garage!

Step 1 · Physical Motion
You Walk Into The Garage

Your Home Assistant Garage Motion Detector triggers in 0.1 seconds — knowing with 100% physical certainty that you are standing in the garage.

Step 2 · UniFi AP Check
Home Assistant Checks Your Phone’s AP

Because Ubiquiti exposes live client AP sensors to Home Assistant, HA sees your phone is still clung to an Indoor Access Point.

Step 3 · Instant Handoff
Snaps Straight to Garage AP (And Back!)

Home Assistant tells UniFi to smoothly reconnect your phone, locking it right onto full-bars Garage Wi-Fi — and does the exact reverse when indoor motion triggers back inside the house!

Interactive Ubiquiti UniFi Network Builder

Build Your Rock-Solid Ubiquiti UniFi Shopping List

Tell us about your home size and internet speed — we’ll match the exact UniFi Gateway, PoE Switch, Indoor Wi-Fi 7 APs, and Garage AP that work together out of the box.

Multi-Gig Wi-Fi 7 UniFi Stack (1,700+ Mbps Ready)

Configured for whole-house coverage PLUS a dedicated Garage/Driveway AP for motion-assisted Home Assistant phone roaming.

Est. Complete System
~$1039
Gateway / Router~$279
Sweet Spot Multi-Gig Brain

Ubiquiti UniFi Cloud Gateway Max (UCG-Max, 2.5GbE)

Compact desktop powerhouse with five 2.5GbE ports and NVMe UniFi Protect camera recording.

Unlocks full 1,700+ Mbps Wi-Fi 7 speeds from 2-Gig fiber/cable ISPs without needing a 19-inch server rack.

Home Assistant Perk: Full local UniFi Network API support in Home Assistant for instant phone presence and automated AP client steering.
Check Price on Amazon
PoE Switch~$199
Unlocks 1,700+ Mbps Wi-Fi

Ubiquiti UniFi Flex 2.5G PoE / Pro Max 16 PoE Switch

2.5GbE PoE+ switching so Wi-Fi 7 access points aren’t bottlenecked at 940 Mbps.

A 1 Gbps switch caps your Wi-Fi speed below ~940 Mbps. A 2.5GbE PoE+ port is the secret ingredient that lets a phone hit 1,700+ Mbps!

Home Assistant Perk: Home Assistant can remotely power-cycle any PoE camera, tablet, or AP port automatically if a device ever freezes.
Check Price on Amazon
Indoor Wi-Fi 7 / 6E AP~$378
1,700+ Mbps Capable

2x Ubiquiti UniFi U7 Pro / U7 Pro Max Tri-Band Wi-Fi 7 AP

2.4 GHz + 5 GHz + clean 6 GHz spectrum with 2.5GbE uplink for jaw-dropping 1,700+ Mbps real-world throughput.

When tuned properly (wide 160/320 MHz 6 GHz channels + balanced 5 GHz power via Antigravity), modern iPhones and laptops fly at wired-like speeds.

Home Assistant Perk: Reports exactly WHICH access point each phone is connected to — enabling room-aware Home Assistant automations!
Check Price on Amazon
Garage & Outdoor AP~$159
Garage Roaming Secret Weapon

Ubiquiti UniFi U6+ or U6 Mesh / U7 Outdoor (Dedicated Garage & Driveway AP)

Eliminates the insulated-wall dead zone in your garage, driveway, EV charger, and front yard.

Fire-rated drywall + foil insulation between a house and garage kills 5 GHz/6 GHz Wi-Fi. Putting a dedicated AP in the garage gives full bars in your car & workshop!

Home Assistant Perk: Pairs with your Garage Motion Detector in Home Assistant to automatically hand your phone onto the Garage AP the moment you walk out there!
Check Price on Amazon
Essential Cabling~$24

Monoprice SlimRun Cat6A 10G Snagless Patch Cables (Pack)

Certified 10Gbps pure bare copper cables for multi-gig PoE+ links between gateway, switch, Mini PC & APs.

One bad old Cat5 cable can silently drop a 2.5GbE AP link down to 100 Mbps! Pure copper Cat6A guarantees full PoE+ power and multi-gig speed.

Home Assistant Perk: Keeps Home Assistant Green / Mini PC hardwired with 0.2ms local latency.
Check Price on Amazon
Interactive Buyer Tools & Decision Trees

Switch to Any Other Hardware Decision Tree Below

Once your Brain and starter lighting are set, explore our interactive decision trees for Sonos whole-home audio, 1,700 Mbps Ubiquiti Wi-Fi, Z-Wave/Zigbee antennas, Plex storage, security sensors, garage reminders, smart locks, and water shutoff valves.